Visual C 9.0 Runtime For Dragon Naturally Speaking X64

When you try to install dragon naturally speaking 11 I get the error message 'not enough avaibale from storage to process this command.' What gives? Dragon says it is compatible with my windows vista Home premium 64-bit. I downloaded on the internet and therefore have no set upwards or the installation disc.

Hi MMBleakley,

1 do you receive the error message only when you try to install this program?

Method 1:

Right-click on the installation files and select run as administrator to install the program.

Method 2:

Alternatively, you can try to run a disk cleanup to remove unwanted files and check if the problem persists.

For more information, please see the following link:

Method 3:

If you're still having problems, try to perform a clean boot, and then install the program.

A clean boot helps eliminate software conflicts. You can check the link below for how to put the computer in a clean boot.

http://support.Microsoft.com/kb/929135
Note: After installing the program, see the section on boot link to how to restore your computer to a Normal startup mode.

Hope this information is useful.

When I use the installation for dragon naturally speaking disk, interruption comes along and says parameters that this version does not work on a processor parameter to be modified for 32-bit processor and 64-bit. How can I make it compatible?

Hello

What operating system is installed on the computer?

9.5 for the Dragon Naturally Speaking version is compatible with Windows 7; You can see the link provided below for more information.

You can uninstall the program and reinstall tryto even.

You can also consult the following link:

32-bit and 64-bit Windows: frequently asked questions

Let us know the result!

It is said that this version is not compatible with 64-bit processor. It runs on windows xp

What follows is the site of Support of Nuance:
'9 and 10.0 version cannot be installed on 64-bit Windows Vista operating systems and will prompt the user with an error message indicating that the operating system is not supported.'

'Applications that don't are not supported on a 64-bit system still can be installed on systems using 64-bit processors if a 32 bit OS is used.'

See: http://nuance.custhelp.com/app/answers/detail/a_id/5269/kw/64-bit
Version 9 is also listed not supported by 32 or 64 bit Windows 7 at: http://nuance.custhelp.com/app/answers/detail/a_id/5775

The following article is however show a method it can be installed on Windows 7 64 bit. http://www.lehsys.com/2009/02/how-to-install-Dragon-NaturallySpeaking-9-on-Windows-7-64-bit/

When the program is instalingl I get a: error 1321 the installer has o priveliges insuficient editing the file. C:Program datamicrosoftwindowsstart menuprogramsdragon speaking.12.0about dragon 12.0.ink naturally natrually. I havve summer running DNS 11.5 for more than a year, without any problem.

Herman

You should check their support site:

Das Programm lass tsich nicht öffnen. Mitteilung: schwerwiegender Fehler bei der Installation, Naturally Speaking wird im Kompatibilitatsmodus ausgeführt, NatSpeakWordAdIn Fehler.

Empfehlung: Deinstallieren, Herunterfahren, Neu Installieren!

Result: Fehler Der bleibt tumors!

This option does not include the structual components or wire/cable. CNC Plans and hardware option includes the large plans set, motion electronincs (motors, drivers, power supplies, and controller/interface), hardware to fasten all of the components together, a water cooled spindle with VFD and all of the necessary mechanical components (rails, bearing blocks, lead screws, bearings, etc.).

Microsoft-Antwort-side has support in englischer Sprache. Die following Uniform Resource Locator (URL) werden dafur sorgen, receive Sie den entsprechenden support information as your location. Öffnen Sie den Link und wahlen Sie your region aus der Dropdown-list und klicken Sie dann auf den Pfeil, um fortzufahren.

I installed Dragon Naturally Speaking on my 64 bit vista laptop. IT worked fine until my computer up to date. Now, it will not work. You have any complaints similar and the fixes for the problem?

Using Win 7, 64-bit, 6 GB of RAM and attempts to install a voice-type prog called Dragon Naturally Speaking 11 by Nuance. The Setup program tries to install Visual C++ Runtime 9.0 on my computer but gives error 1935 and stops. Seller says usually his fault Antivirus Prog. I completely uninstalled Antivirus Zonelabs, rebuted and attempt to reinstall but get same error 1935. Here's the exact message;

An error occurred during the installation of assembly component. {837BF1EB-D770-94EB-AO1F-C8B3B9A1E18E}. HRESULT: 0X80070BC9.

Program is run on the old XP computer successfully.

TEP 1

This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

(a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

(b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

(c) after the reboot, open again 'Turn Windows features on or off' and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

Step 2

If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
Package redistributable Visual C++ 2005 (X 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
Visual C++ 2005 (x 64) redistributable package manager
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

Package redistributable Microsoft Visual C++ 2008 (x 86)

http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

Package redistributable Visual C++ 2008 SP1 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

Please answer back with an update.

Thank you

Marilyn

Original title: * stop: 0X0000008E (0X9F266F91, 0X942F5F64, 0XC0000090, 0x00000000)

I have xp professional sp3 on a laptop that I bought for the College and try to use Dragon Naturally Speaking v.10. I have the program loaded and am able to open it and to do the two micro checks, but when I try to start the windows training part stops and gives me the above stop error message. I used v.9.5 DNS on an older desktop with xp with sp2 and never had any problems. What is the difference and can something be fixed so that I can use v.10 on my laptop?

Hi Markiepoo,

Method 1:

You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

You can read the following article to put the computer in a clean boot:

If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

Method 2:

If you're still having problems, then try to uninstall and reinstall the program.

a. Click Start, click Control Panel and then double-click Add / Remove programs.

b. in the currently installed programs, click the program you want to remove and then click on remove.

c. If you are prompted to confirm the removal of the program, click Yes.

d. restart the computer and reinstall the program.

For more information, see the following article:

How to change or remove a program in Windows XP

Also check out the following link and check if it helps:

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Hello

I have been using the installation of Dragon mobile n/s on the same computer for awhile. Previously, it was beautiful, but then began to generate errors..
I reinstalled Dragon - did not work.

SO:
I reinstalled my laptop (Dell XPS) of the pre-installed utility image.

Now I can't install Dragon no matter what I do. I tried the fix (turning offf such DEP) suggested by Dragon/Nuance but it makes no difference..

Dell XPS / 4 GB RAM / Windows Vista Home Premium (32-bit, service pack 2, completely developed to date)

Dragon Naturally Speaking Professional 9.5 - full install for Vista 32 bit

Etc. COMODO firewall/av/spyware (free version)

TIA,
Scott

----------------------------------
Information about the system event log:
----------------------------------
Level Date and time Source event task category ID
Information on 2009-09-21 17:56:17 MsiInstaller 1033 no Windows Installer installed the product. Product name: Dragon NaturallySpeaking 9. Product version: 9.51.200. Product language: 1033. Installation success or error status: 1603.
Information on 2009-09-21 17:56:17 MsiInstaller 11708 no product: Dragon NaturallySpeaking 9 - the Installation operation failed.
Information on 2009-09-21 17:56:14 Microsoft - Windows - RestartManager 10001 no ending session 1 started 2009-09-21 21:48:39.
Information on 2009-09-21 17:56:14 MsiInstaller 1042 None ending a transaction of Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingDragon NaturallySpeaking 9.msi. Client process ID: 804.
Error 2009-09-21 17:55:46 MsiInstaller 11722 no product: Dragon NaturallySpeaking 9 - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action JustExit, location: C:Program FilesNuanceNaturallySpeaking9Programnatspeak.exe, command:-JustExit
Information on 2009-09-21 17:53:20 service VSS 8224 None The VSS stops due to inactivity.
Information on 2009-09-21 17:50:02 VSS 8220 no Ran out of time when deleting files.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:49:30 VSS 8219 no Ran out of time during the expansion of the file specification ?GLOBALROOTDeviceHarddiskVolumeShadowCopy28Windowssoftwaredistribution*.*. This made for the WUA Subscriber.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:49:30 VSS 8219 no Ran out of time during the expansion of the file specification ?GLOBALROOTDeviceHarddiskVolumeShadowCopy28WindowssoftwaredistributionDownload*.*. This made for the WUA Subscriber.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:49:30 VSS 8219 no Ran out of time during the expansion of the file specification ?GLOBALROOTDeviceHarddiskVolumeShadowCopy28WindowssoftwaredistributionDownloadb635b7a7651f5dd1a95f6d85f3bb620f*.*. This made for the WUA Subscriber.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:48:39 no startup of Microsoft-Windows-RestartManager 10000 session 1-21/09/2009 21:48:39.
Information on 2009-09-21 17:48:39 System Restore 8194 None successfully created restore point (process = C:Windowssystem32msiexec.exe /V;) Description = installed Dragon NaturallySpeaking 9).
Information on 2009-09-21 17:48:11 1040 MsiInstaller no beginning a transaction of Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingDragon NaturallySpeaking 9.msi. Client process ID: 804.
Information on 2009-09-21 17:47 IDriverT 0 None 'the description for event ID 0 in source IDriverT is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event is on another computer, the display information had to be saved with the event.

The following information has been included in the event:

Service started
'
Information on 2009-09-21 17:46:56 Microsoft - Windows - RestartManager 10001 no ending session 1 started 2009-09-21 21:46:54.
Information on 2009-09-21 17:46:56 MsiInstaller 1042 None ending a transaction of Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingISScript1050.Msi. Client process ID: 844.
Information on 2009-09-21 17:46:56 MsiInstaller 1033 no Windows Installer installed the product. Product name: ISScript. Product version: 3.00.185. Product language: 1033. Installation success or error status: 0.
Information on 2009-09-21 17:46:56 MsiInstaller 11707 no product: ISScript - the operation of Installation completed successfully.
Information on 2009-09-21 17:46:54 Microsoft - Windows - RestartManager 10000 no start session 1-21/09/2009 21:46:54.
Information on 2009-09-21 17:46:53 MsiInstaller 1040 no start a transaction to Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingISScript1050.Msi. Client process ID: 844.

Hello hscowan,

Have you already tried the Windows Installer Cleanup utility? I do not see an answer to know if you have tried to see if it help you clean a
corrupted installations.

If the cleaning tool does not help, the only other option would be to contact Nuance, the seller for Dragon speaking naturally. They have supported
for their product. I saw an article here not be able to install on Windows Vista if it is an upgrade to Windows XP. Don't know if your installation
was an upgrade or not.

The other option, I would try is temporarily disable User Account control and see if this will help get installed it.

If please report back and let us know the result.

Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

I tried for more than a month to get the Dragon Naturally Speaking 11 is installed on a 64-bit Windows 7 computer. Installation always gets to a point where it appears close to finishing but then gets an error 1722 and supports everything that was the case.

Went through several iterations, with the support of Nuance that included reduced installation, start clean and new user. I emailed a couple of log files, but they have been unable to solve my problem.

My search of the 1722 error indicated a possible problem with the windows installer file, but it seems to work. The answer for an apparent similar problem had a link to a utility install cleanup but this link now seems to lead to a 404 error.

http://download.Microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe

It tries to download a file, but it fails.

Any ideas on what I might try next?

One thing that could mean something, it's that before C++ for Dragon v. 9.0 it also fails due to an apparent previous installation. That ignoring the warning and proceed with the installation of C++ can you spent the game apparently with success. If you follow the recommendation to restart and reinstall it goes into a loop trying to install, but then fail after reboot recommended.

Computer is

Intel Cor it 750 @ 2.67 GHz

8 GB Ram

64 bit

Windows 7 is installed

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Dragon Naturally Speaking, I installed but it will not open or run what is wrong?

[Moved - Windows 7, IE9]

Hi patrickquinn35,

Thank you for writing to Microsoft Communities. The description of your problem, I understand that the Dragon Naturally Speaking application does not work. Before you start the troubleshooting steps, I need the required information:

· He has already worked?

· Did you do changes on the computer before the show?

· You get the error message?

Follow these methods.

Method 1: Uninstall and reinstall the application.

Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

If the problem persists, you can also contact the support of application provider for more help and information.

Let us know if you need more assistance. We will be happy to help you.

Thank you.

Dragon Naturally Speaking v10 hangs Word 2007 on Vista Home Premium 64-bit (dgnword.dll error code: 0xc0000409). It worked fine for a few months, but then started crashing Word 2007 as soon as it says 'loading.. dictated.' ». I have uninstalled/reinstalled Dragon; same accident. Uninstalled/2007reinstalled office; same accident. Did anyone see the problem? Any ideas on how to track it down? Technical support in the shade had some ideas. I don't know if it's worth to call MS tech support since it may not be a problem of Ms. Thank you.

Hi Rrobinson3,

Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS Office and would be better suited to the Office Online community. Please visit the link below to find a community that will provide the support you want.

JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Original title: Dragon Naturally Speaking will not charge. He was working. I have time. The only thing different is my 10 3 demo of windows expiredeinstalled

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:

• Dragon Naturally Speaking does not load. He was working. I have time. The only thing different is my demo windows 10 expiredeinstalled 3 programs you have problems with
• Error messages Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak
• Recent changes to your computer
• What you have already tried to solve the problem I find no windows compatibility mode. I do not know how

Hi jrskona,

1. don't you make changes before the show?

Try the following steps to disable the compatibility mode.
a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
b. click on the Compatibility tab.
c. in compatibility mode, uncheck the box 'run this program in compatibility mode for'.
d. click ok to apply the changes.
e. check if the problem persists.

If the problem persists, then contact the program vendor support team:seeDragon NaturallySpeaking support

Visit our Microsoft answers feedback Forum and let us know what you think.

Win XP Prof SP3 using: X 2 AMD Athlon 64 Dual Core processor 5200 + w / 4 Gig of Ram

Info from the application event viewer;

Failing application explorer.exe, version 6.0.2900.5512, failed module comctl32.dll, version 6.0.2900.5512, address failure 0 x 00076215.

Failing application drwtsn32.exe, version 5.1.2600.0, failed module dbghelp.dll, version 5.1.2600.5512, address 0x0001295d failure.

The details are as follows,

Product used is Dragon Naturally Speaking (DNS) version 10.1 and according to the seller the problem isn't a problem caused DNS by their Tech Support who I worked with for more than a week.. However the problem only occurs when this program is running. The only way that I was able to temporarily fix the problem is to stop the DNS program in the Task Manager process section and restart explorer.exe

Given that the supplier says it's a matter of Windows and with the info I provided please help.

Thank you.

Try saving the DLL for applications that crashes.

It worked for me with IE crashing.

Try to watch a movie, but it takes to long to load and it stops then takes more time to load again

How can I download Skype

Hello Under the State of 'Calibrate Image', 'Save the image calibrated to the file' option does not work correctly. With the exception of the type 'Point of Distance' of the calibration, the new image is ever recorded. I checked the calibration image

Hi all I'm (slowly) learning how LabVIEW plays well with the cameras, GigE, that I just bought. At this point, I'm trying to understand how to programmatically set the value of fps for the camera. I have been using the examples NOR-IMAQdx to control

FSX title page loads and does not

When you try to install dragon naturally speaking 11 I get the error message 'not enough avaibale from storage to process this command.' What gives? Dragon says it is compatible with my windows vista Home premium 64-bit. I downloaded on the internet and therefore have no set upwards or the installation disc.

Hi MMBleakley,

1 do you receive the error message only when you try to install this program?

Method 1:

Right-click on the installation files and select run as administrator to install the program.

Method 2:

Alternatively, you can try to run a disk cleanup to remove unwanted files and check if the problem persists.

For more information, please see the following link:

Method 3:

If you're still having problems, try to perform a clean boot, and then install the program.

A clean boot helps eliminate software conflicts. You can check the link below for how to put the computer in a clean boot.

http://support.Microsoft.com/kb/929135
Note: After installing the program, see the section on boot link to how to restore your computer to a Normal startup mode.

Hope this information is useful.

When I use the installation for dragon naturally speaking disk, interruption comes along and says parameters that this version does not work on a processor parameter to be modified for 32-bit processor and 64-bit. How can I make it compatible?

Hello

What operating system is installed on the computer?

9.5 for the Dragon Naturally Speaking version is compatible with Windows 7; You can see the link provided below for more information.

You can uninstall the program and reinstall tryto even.

You can also consult the following link:

32-bit and 64-bit Windows: frequently asked questions

Let us know the result!

It is said that this version is not compatible with 64-bit processor. It runs on windows xp

What follows is the site of Support of Nuance:
'9 and 10.0 version cannot be installed on 64-bit Windows Vista operating systems and will prompt the user with an error message indicating that the operating system is not supported.'

'Applications that don't are not supported on a 64-bit system still can be installed on systems using 64-bit processors if a 32 bit OS is used.'

See: http://nuance.custhelp.com/app/answers/detail/a_id/5269/kw/64-bit
Version 9 is also listed not supported by 32 or 64 bit Windows 7 at: http://nuance.custhelp.com/app/answers/detail/a_id/5775

The following article is however show a method it can be installed on Windows 7 64 bit. http://www.lehsys.com/2009/02/how-to-install-Dragon-NaturallySpeaking-9-on-Windows-7-64-bit/

When the program is instalingl I get a: error 1321 the installer has o priveliges insuficient editing the file. C:Program datamicrosoftwindowsstart menuprogramsdragon speaking.12.0about dragon 12.0.ink naturally natrually. I havve summer running DNS 11.5 for more than a year, without any problem.

Herman

You should check their support site:

Das Programm lass tsich nicht öffnen. Mitteilung: schwerwiegender Fehler bei der Installation, Naturally Speaking wird im Kompatibilitatsmodus ausgeführt, NatSpeakWordAdIn Fehler.

Empfehlung: Deinstallieren, Herunterfahren, Neu Installieren!

Result: Fehler Der bleibt tumors!

This option does not include the structual components or wire/cable. CNC Plans and hardware option includes the large plans set, motion electronincs (motors, drivers, power supplies, and controller/interface), hardware to fasten all of the components together, a water cooled spindle with VFD and all of the necessary mechanical components (rails, bearing blocks, lead screws, bearings, etc.).

Microsoft-Antwort-side has support in englischer Sprache. Die following Uniform Resource Locator (URL) werden dafur sorgen, receive Sie den entsprechenden support information as your location. Öffnen Sie den Link und wahlen Sie your region aus der Dropdown-list und klicken Sie dann auf den Pfeil, um fortzufahren.

I installed Dragon Naturally Speaking on my 64 bit vista laptop. IT worked fine until my computer up to date. Now, it will not work. You have any complaints similar and the fixes for the problem?

Using Win 7, 64-bit, 6 GB of RAM and attempts to install a voice-type prog called Dragon Naturally Speaking 11 by Nuance. The Setup program tries to install Visual C++ Runtime 9.0 on my computer but gives error 1935 and stops. Seller says usually his fault Antivirus Prog. I completely uninstalled Antivirus Zonelabs, rebuted and attempt to reinstall but get same error 1935. Here's the exact message;

An error occurred during the installation of assembly component. {837BF1EB-D770-94EB-AO1F-C8B3B9A1E18E}. HRESULT: 0X80070BC9.

Program is run on the old XP computer successfully.

TEP 1

This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

(a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

(b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

(c) after the reboot, open again 'Turn Windows features on or off' and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

Step 2

If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
Package redistributable Visual C++ 2005 (X 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
Visual C++ 2005 (x 64) redistributable package manager
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

Package redistributable Microsoft Visual C++ 2008 (x 86)

http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

Package redistributable Visual C++ 2008 SP1 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

Please answer back with an update.

Thank you

Marilyn

Original title: * stop: 0X0000008E (0X9F266F91, 0X942F5F64, 0XC0000090, 0x00000000)

I have xp professional sp3 on a laptop that I bought for the College and try to use Dragon Naturally Speaking v.10. I have the program loaded and am able to open it and to do the two micro checks, but when I try to start the windows training part stops and gives me the above stop error message. I used v.9.5 DNS on an older desktop with xp with sp2 and never had any problems. What is the difference and can something be fixed so that I can use v.10 on my laptop?

Hi Markiepoo,

Method 1:

You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

You can read the following article to put the computer in a clean boot:

If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

Method 2:

If you're still having problems, then try to uninstall and reinstall the program.

a. Click Start, click Control Panel and then double-click Add / Remove programs.

b. in the currently installed programs, click the program you want to remove and then click on remove.

c. If you are prompted to confirm the removal of the program, click Yes.

d. restart the computer and reinstall the program.

For more information, see the following article:

How to change or remove a program in Windows XP

Also check out the following link and check if it helps:

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Hello

I have been using the installation of Dragon mobile n/s on the same computer for awhile. Previously, it was beautiful, but then began to generate errors..
I reinstalled Dragon - did not work.

SO:
I reinstalled my laptop (Dell XPS) of the pre-installed utility image.

Now I can't install Dragon no matter what I do. I tried the fix (turning offf such DEP) suggested by Dragon/Nuance but it makes no difference..

Dell XPS / 4 GB RAM / Windows Vista Home Premium (32-bit, service pack 2, completely developed to date)

Dragon Naturally Speaking Professional 9.5 - full install for Vista 32 bit

Etc. COMODO firewall/av/spyware (free version)

TIA,
Scott

----------------------------------
Information about the system event log:
----------------------------------
Level Date and time Source event task category ID
Information on 2009-09-21 17:56:17 MsiInstaller 1033 no Windows Installer installed the product. Product name: Dragon NaturallySpeaking 9. Product version: 9.51.200. Product language: 1033. Installation success or error status: 1603.
Information on 2009-09-21 17:56:17 MsiInstaller 11708 no product: Dragon NaturallySpeaking 9 - the Installation operation failed.
Information on 2009-09-21 17:56:14 Microsoft - Windows - RestartManager 10001 no ending session 1 started 2009-09-21 21:48:39.
Information on 2009-09-21 17:56:14 MsiInstaller 1042 None ending a transaction of Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingDragon NaturallySpeaking 9.msi. Client process ID: 804.
Error 2009-09-21 17:55:46 MsiInstaller 11722 no product: Dragon NaturallySpeaking 9 - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action JustExit, location: C:Program FilesNuanceNaturallySpeaking9Programnatspeak.exe, command:-JustExit
Information on 2009-09-21 17:53:20 service VSS 8224 None The VSS stops due to inactivity.
Information on 2009-09-21 17:50:02 VSS 8220 no Ran out of time when deleting files.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:49:30 VSS 8219 no Ran out of time during the expansion of the file specification ?GLOBALROOTDeviceHarddiskVolumeShadowCopy28Windowssoftwaredistribution*.*. This made for the WUA Subscriber.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:49:30 VSS 8219 no Ran out of time during the expansion of the file specification ?GLOBALROOTDeviceHarddiskVolumeShadowCopy28WindowssoftwaredistributionDownload*.*. This made for the WUA Subscriber.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:49:30 VSS 8219 no Ran out of time during the expansion of the file specification ?GLOBALROOTDeviceHarddiskVolumeShadowCopy28WindowssoftwaredistributionDownloadb635b7a7651f5dd1a95f6d85f3bb620f*.*. This made for the WUA Subscriber.

Operation:
OnPostSnapshot event
PostSnapshot event

Context:
Execution context: Shadow Copy optimization writer
Execution context: writer
Writer class ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Author name: Shadow Copy optimization writer
Writer Instance ID: {19e783a6-6df8-4c08-8010-7daf71f56c80}
Information on 2009-09-21 17:48:39 no startup of Microsoft-Windows-RestartManager 10000 session 1-21/09/2009 21:48:39.
Information on 2009-09-21 17:48:39 System Restore 8194 None successfully created restore point (process = C:Windowssystem32msiexec.exe /V;) Description = installed Dragon NaturallySpeaking 9).
Information on 2009-09-21 17:48:11 1040 MsiInstaller no beginning a transaction of Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingDragon NaturallySpeaking 9.msi. Client process ID: 804.
Information on 2009-09-21 17:47 IDriverT 0 None 'the description for event ID 0 in source IDriverT is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event is on another computer, the display information had to be saved with the event.

The following information has been included in the event:

Service started
'
Information on 2009-09-21 17:46:56 Microsoft - Windows - RestartManager 10001 no ending session 1 started 2009-09-21 21:46:54.
Information on 2009-09-21 17:46:56 MsiInstaller 1042 None ending a transaction of Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingISScript1050.Msi. Client process ID: 844.
Information on 2009-09-21 17:46:56 MsiInstaller 1033 no Windows Installer installed the product. Product name: ISScript. Product version: 3.00.185. Product language: 1033. Installation success or error status: 0.
Information on 2009-09-21 17:46:56 MsiInstaller 11707 no product: ISScript - the operation of Installation completed successfully.
Information on 2009-09-21 17:46:54 Microsoft - Windows - RestartManager 10000 no start session 1-21/09/2009 21:46:54.
Information on 2009-09-21 17:46:53 MsiInstaller 1040 no start a transaction to Windows Installer: C:UsersScottAppDataLocalTempNaturallySpeakingISScript1050.Msi. Client process ID: 844.

Hello hscowan,

Have you already tried the Windows Installer Cleanup utility? I do not see an answer to know if you have tried to see if it help you clean a
corrupted installations.

If the cleaning tool does not help, the only other option would be to contact Nuance, the seller for Dragon speaking naturally. They have supported
for their product. I saw an article here not be able to install on Windows Vista if it is an upgrade to Windows XP. Don't know if your installation
was an upgrade or not.

The other option, I would try is temporarily disable User Account control and see if this will help get installed it.

If please report back and let us know the result.

Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

I tried for more than a month to get the Dragon Naturally Speaking 11 is installed on a 64-bit Windows 7 computer. Installation always gets to a point where it appears close to finishing but then gets an error 1722 and supports everything that was the case.

Went through several iterations, with the support of Nuance that included reduced installation, start clean and new user. I emailed a couple of log files, but they have been unable to solve my problem.

My search of the 1722 error indicated a possible problem with the windows installer file, but it seems to work. The answer for an apparent similar problem had a link to a utility install cleanup but this link now seems to lead to a 404 error.

http://download.Microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe

It tries to download a file, but it fails.

Any ideas on what I might try next?

One thing that could mean something, it's that before C++ for Dragon v. 9.0 it also fails due to an apparent previous installation. That ignoring the warning and proceed with the installation of C++ can you spent the game apparently with success. If you follow the recommendation to restart and reinstall it goes into a loop trying to install, but then fail after reboot recommended.

Computer is

Intel Cor it 750 @ 2.67 GHz

8 GB Ram

64 bit

Windows 7 is installed

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Dragon Naturally Speaking, I installed but it will not open or run what is wrong?

[Moved - Windows 7, IE9]

Hi patrickquinn35,

Thank you for writing to Microsoft Communities. The description of your problem, I understand that the Dragon Naturally Speaking application does not work. Before you start the troubleshooting steps, I need the required information:

· He has already worked?

· Did you do changes on the computer before the show?

· You get the error message?

Follow these methods.

Method 1: Uninstall and reinstall the application.

Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

If the problem persists, you can also contact the support of application provider for more help and information.

Let us know if you need more assistance. We will be happy to help you.

Thank you.

Dragon Naturally Speaking v10 hangs Word 2007 on Vista Home Premium 64-bit (dgnword.dll error code: 0xc0000409). It worked fine for a few months, but then started crashing Word 2007 as soon as it says 'loading.. dictated.' ». I have uninstalled/reinstalled Dragon; same accident. Uninstalled/2007reinstalled office; same accident. Did anyone see the problem? Any ideas on how to track it down? Technical support in the shade had some ideas. I don't know if it's worth to call MS tech support since it may not be a problem of Ms. Thank you.

Hi Rrobinson3,

Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to MS Office and would be better suited to the Office Online community. Please visit the link below to find a community that will provide the support you want.

JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Original title: Dragon Naturally Speaking will not charge. He was working. I have time. The only thing different is my 10 3 demo of windows expiredeinstalled

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:

• Dragon Naturally Speaking does not load. He was working. I have time. The only thing different is my demo windows 10 expiredeinstalled 3 programs you have problems with
• Error messages Dragon Naturally Speaking seems to work in Compatibility Mode Windows, which can lead to errors. We recommend to disable the compatibility mode for the program natspeak
• Recent changes to your computer
• What you have already tried to solve the problem I find no windows compatibility mode. I do not know how

Hi jrskona,

1. don't you make changes before the show?

Try the following steps to disable the compatibility mode.
a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
b. click on the Compatibility tab.
c. in compatibility mode, uncheck the box 'run this program in compatibility mode for'.
d. click ok to apply the changes.
e. check if the problem persists.

If the problem persists, then contact the program vendor support team:seeDragon NaturallySpeaking support

Visit our Microsoft answers feedback Forum and let us know what you think.

Win XP Prof SP3 using: X 2 AMD Athlon 64 Dual Core processor 5200 + w / 4 Gig of Ram

Info from the application event viewer;

Failing application explorer.exe, version 6.0.2900.5512, failed module comctl32.dll, version 6.0.2900.5512, address failure 0 x 00076215.

Failing application drwtsn32.exe, version 5.1.2600.0, failed module dbghelp.dll, version 5.1.2600.5512, address 0x0001295d failure.

The details are as follows,

Product used is Dragon Naturally Speaking (DNS) version 10.1 and according to the seller the problem isn't a problem caused DNS by their Tech Support who I worked with for more than a week.. However the problem only occurs when this program is running. The only way that I was able to temporarily fix the problem is to stop the DNS program in the Task Manager process section and restart explorer.exe

Given that the supplier says it's a matter of Windows and with the info I provided please help.

Thank you.

Try saving the DLL for applications that crashes.

It worked for me with IE crashing.

Try to watch a movie, but it takes to long to load and it stops then takes more time to load again

How can I download Skype

Hello Under the State of 'Calibrate Image', 'Save the image calibrated to the file' option does not work correctly. With the exception of the type 'Point of Distance' of the calibration, the new image is ever recorded. I checked the calibration image

Hi all I'm (slowly) learning how LabVIEW plays well with the cameras, GigE, that I just bought. At this point, I'm trying to understand how to programmatically set the value of fps for the camera. I have been using the examples NOR-IMAQdx to control

FSX title page loads and does not